Site Map
The following is a list of all the Boat Lift Categories, Products, and Featured Articles on our site. We hope it will assist you in finding what you're looking for.
1/2" HDG Bolts
2-Point Pickup Lift Kit
3/8" HDG Carriage Bolts
3-Point Pickup Lift Kits
5/8" HDG Bolts
Aluminum Boat Lifts
Aluminum Cradle Beams
Aluminum Piling Mount Boat Lifts
Aluminum Spreader Bars
Bearings Assembly
Belts
Boat Lift Motors, Gearboxes, & Accessories
Boat Lift Parts
Boat Lifts
Bolts
Lunmar stocks galvanized bolts!!
Bunks
CABLE
Cable Accessories
Cable Upgrades (Galvanized to Stainless Steel)
Cable Weights
Cable Winders
Canopies & Enclosures
Cargo Lift
Channel Mount Boat Lifts
Contractor Items and Tools
Coupling Nuts
Covers
Cradle Beams & Bunks
Cradle Lift Kits
Cradle Parts & Conversion Kits
Davits/ Cranes
Dock Accessories
Dock Ladders
Docks
Double-Braided Nylon Rope
Extra Cable Parts
Floating Docks
Floating Drum Sizes
Galvanized Cable
Galvanized Cradle Beams
Galvanized Piling Mount Boat Lifts
Galvanized Spreader Bars
Galvanized Vinyl Coated Cable
Gangways
Gearboxes
Gem Remotes
Hangers
I-Beam Clamp Boat Lifts
Lunmar Motorized Screens
Magnum (Low Profile) Boat Lifts
Motor Pulleys
Motors
Non-Weighted Slings
Nylon Boat Lift Slings
Permafloat Sizes
Piling Cap Types and Sizes
Piling Caps
Pontoon Cradle Lift Kits
Pulleys
PWC Boat Lifts
Readimade Cable
Readimade Galvanized Cable
Readimade Stainless Steel Cable
Replacement Cable for Lifts
Rope
Side Mount Boat Lifts
Sling Lifts
Spreader Bars
Stainless Steel Cable
Stainless Steel Vinyl Coated Cable
Steel Mount Boat Lifts
Switches & GFCI
Vinyl Coated Cable
Weighted Slings
Winches For Gearboxes
Wood Mount Boat Lifts
 top
6" x 9' V-CRADLE BEAMS
9' X 6" ALUMINUM V- CRADLE
AMS 3000 (Most Popular Unit)
3/4 HP motor with 3000 gearplate. Also comes with GFCI and Switch(maintain). It is wired 110
Sale Price will show when added to cart!
AMS 4000
Motor--1 hp,120/240V, 13.5 amps, TENV, Wiring--14 Gauge (weatherproof). Galvanized Plate--1/4" steel 12x24". Gear--12" cast precision machined. Hoist Speed--2.5 vertical feet per min. faster speeds available.
Sale Price will show when added to cart!
AMS 3000, 4000, 5000 E-Gear
The E-Gear (totally enclosed flat plate lift system) is driven by a state of the art oil bath gear reducer. Our system incorporates the gear drive directly to the drive shaft, powered by either a 3/4hp, 1hp, or a 1 1/2hp motor.
LUNMAR ROTOMAG
The ROTOMAG, from Lunmar Boat Lifts, allows you to raise your vessel and rotate it over the dock for easy and safe access. The tube in a tube design means that when raised, no part of the lift remains in the water. The ROTOMAG is easily installed on pilings 43" above the deck level or higher, And for pilings that are only 28" high we offer an optional Stubby Mount.
12,000# Aluminum Beamless Lift
12,000# Aluminum Beamless Lift
Track Upgrade:
The track upgrade is where they weld however many feet extra to the standard 8' track. All PWC Lifts Come Standard with an 8' Track. Now to see if 8' of track will work or you will need a longer track measure from the dock to the mud + 2' and you got what size track you will need.
MiniMag 800# (MANUAL)
Weight Capacity -- 800 lbs., Arm Length -- 3', Arm Width -- 2', Piling Requirement -- 8" round or 6" square. Track length 8'. Travel 6'. Tracks available 8', 10', 12'.
1/2" x 1 1/2"
HDG Bolt
Grade 2 . Hot Dipped Galvanized(HDG).
1/4" Double Braided Nylon Rope(600 spool)
Approximate Tensile Strength 2100#.
1/8" Galvanized Cable
2,000 lbs. Breaking Strength. 7 X 19 Price is PER FOOT.
1/8" Stainless Steel Cable
1760 lbs. Breaking Strength. 7 X 19 304 Price is PER FOOT.
2' Dock Bracket
Price is for Each bracket.
2" x 5/8" bore
2" x 5/8" bore
3' Dock Bracket
Price is for Each bracket.
3/16" Vinyl Coated Galvanized Cable
4200 lbs. Breaking Strength. 7x19 Clear Coated. Price is PER FOOT.
3/16" Vinyl Coated Stainless Steel Cable
4200 lbs. Breaking Strength. 7 x 19 Clear Coated. Price is PER FOOT.
3/4 HP Motor TENV w/Switch, GFCI, & Wire
3/4 HP Motor TENV w/Switch, GFCI, & Wire 56 Frame
Direct Replacement for AMS 3000 and ACE 2800
MOST POPULAR
3/8" x 4" HDG Carriage Bolts
Grade 2. Hot Dipped Galvanized (HDG).
3000# (CL) Wood Mount Cradle Boat Lift
3000lb Wood Mount
Cradle Boat Lift
3000# SL Wood Mount Sling Boat Lift
3000lb Wood Mount
Sling Boat Lift
3000# Sling Kit {Wood Mount} -- Center Pipe Configuration
4' Dock Bracket
Price is for Each bracket.
400# Piling Mount Davit 3' Reach
400# Piling Mount Davit 3' Reach.
400# Piling Mount Davit 4' Reach
400# Piling Mount Davit 4' Reach
400# Seawall Mount Davit 3' Reach
400# Seawall Mount Davit 3' Reach
400# Seawall Mount Davit 4' Reach
400# Seawall Mount Davit 4' Reach
4200# Piling Mount CradleLift
4200# Capacity
Piling Mount Cradle Boat Lift
Best Value
4200# Piling Mount Sling Boat Lift
4200lb Piling Mount
Sling Boat Lift
Best Value
4500# I-Beam Mount Cradle Kit Boat Lift
The I-Beam kits are desinged to clamp to an existing i-beam. This lift allows you to attach all components to the overhead beams without having to drill any holes. This lift comes complete with all nec parts except for the 1 1/2 pipes and bunk boards.
4500# I-Beam Mount Sling Kit Boat Lift
The I-Beam kits are desinged to clamp to an existing i-beam. This lift allows you to attach all components to the overhead beams without having to drill any holes. This lift comes complete with all nec parts except for the 1 1/2 pipes.
5 1/2" Piling Cap
5" x 8' Galvanized Cradle Beam
6000# Capacity. Shown with optional chock bracket.
5/8" Coupling Nuts
Hot Dipped Galvanized
5/8" x 3" HDG Bolt
Grade 2. Hot Dipped Galvanized (HDG).
560 Pulley {Best Value}
6" x 9' Aluminum Cradle Beam
6000# Capacity. This item may take 10 days for shipment.
6# Cable Weight
6# lead weight, slides over cable.
6000# Aluminum Piling Mount Boat Lift
Aluminum Piling Mount
(6000# Piling Mount)
Aluminum and stainless steel construction.
80' Stainless Steel Cable Upgrade
1/4" STAINLESS STEEL CABLE
This cable upgrade is for any 3000 # and 4000 # Lifts.
Chock Bracket
16" Galvanized chock bracket for beams up to 6". 22" Galvanized chock bracket for beams up to 12".
Galvanized Cable Clamp (cable stopper)
GEM Remote for Lunmar Single Motor Boat Lifts
Simplified version of the popular Gem 1 Remote. Up-off-down override switch on side. Comes with waterproof transmitter. Works great on Lunmar BoatHouse Kits and Minimag Kits.
MiniMag 2800 Lift
This low profile, open span design makes this lift very attractive and easy to use. Attaches to two pilings along your dock or seawall.
MiniMag 800# (ELECTRIC)
Weight Capacity -- 800 lbs., Arm Length -- 3', Arm Width -- 2', Piling Requirement -- 8" round or 6" square. Track length 8'. Travel 6'. Tracks available 8', 10', 12'.
Sealed Bearing (Wood)
1 1/2" ID pipe. Internal Diameter is 1.97".
1/4" Double Braided Nylon Rope (1200' Spool)
Approximate Tensile Strength 2100#.
1/8" Galvanized Cable (250' Spool)
2000 lbs. Breaking Strength. 7x19
1/8" Stainless Steel Cable (250' Spool)
1760 lbs. Breaking Strength. 7 X 19 304
3/16" Vinyl Coated Galvanized Cable (250' Spool)
4200 lbs. Breaking Strength. 7x19 Clear Coated.
3/16" Vinyl Coated Stainless Steel Cable (250' Spool)
4200 lbs. Breaking Strength. 7 x 19 Clear Coated.
5" x 8'6" Galvanized Cradle Beam
6000# Capacity. Shown with optional chock bracket.
6" x 10' Aluminum Cradle Beam
6000# Capacity. This item may take 10 days to ship.
AMS 3000 (Chain and Sprocket)
Available on all models!
Minimag 800# Swivel (MANUAL)
Weight Capacity -- 800 lbs., Arm Length -- 3', Arm Width -- 2', Piling Requirement -- 8" round or 6" square. Track length 8'. Travel 6'. Tracks available in 8', 10', 12'. Rotates 180 degrees.
Sealed Bearing (I-Beam)
1 1/2" ID pipe
1/8" Galvanized Cable (500' Spool)
2000 lbs. Breaking Strength. 7x19
1/8" Stainless Steel Cable (500' Spool)
1760 lbs. Breaking Strength. 7 X 19 304
3/16" Vinyl Coated Galvanized Cable (500' Spool)
4200 lbs. Breaking Strength. 7x19 Clear Coated.
3/16" Vinyl Coated Stainless Steel Cable (500' Spool)
4200 lbs. Breaking Strength. 7 x 19 Clear Coated.
5" x 9' Galvanized Cradle Beam
6000# Capacity. Shown with optional chock bracket.
6" x 11' Aluminum Cradle Beam
6000# Capacity. This item may take 10 days to ship
AMS 3000 Gearplate (12 Volt)
Designed for applications where 120/220 volt power unavailable. Unit is wired with jumper cable like ends with a 50 amps switch.
MiniMag 800# Swivel (ELECTRIC)
Weight Capacity -- 800 lbs., Arm Length -- 3', Arm Width -- 2', Piling Requirement -- 8" round or 6" square. Track length 8'. Travel 6'. Tracks available in 8', 10', 12'. Rotates 180 degrees.
1/8" Galvanized Cable (1,000' Spool)
2000 lbs. Breaking Strength. 7x19
1/8" Stainless Steel Cable (1,000' Spool)
1760 lbs. Breaking Strength. 7 X 19 304
3/16" Vinyl Coated Galvanized Cable (1,000' Spool)
4200 lbs. Breaking Strength. 7x19 Clear Coated.
3/16" Vinyl Coated Stainless Steel Cable (1,000' Spool)
4200 lbs. Breaking Strength. 7 x 19 Clear Coated.
5" x 9'6" Galvanized Cradle Beam
6000# Capacity. Shown with optional chock bracket.
6" x 12' Aluminum Cradle Beam
6000# Capacity. This item may take 10 days to ship.
AMS 3000-- Gearplate Only
AMS 3000 Gearplat ONLY. Hot Dipped Galvanized Backplate. Comes with 10" Pulley and Belt.
1/8" Galvanized Cable (5,000' Spool)
2000 lbs. Breaking Strength. 7x19
1/8" Stainless Steel Cable (5,000' Spool)
1760 lbs. Breaking Strength. 7 X 19 304
3/16" Vinyl Coated Galvanized Cable (5,000 Spool)
4200 lbs. Breaking Strength. 7x19 Clear Coated.
3/16" Vinyl Coated Stainless Steel Cable (5,000' Spool)
4200 lbs. Breaking Strength. 7 x 19 Clear Coated.
5" x 10' Galvanized Cradle Beam
6000# Capacity. Shown with optional chock bracket.
5" x 13' Galvanized Overhead Beam
Boat House Lifts. 5" x 13' beam is designed to be used when there are no supports running perpindicular to boat. Beam replaces 2x12's that are required in wood mount kit. Can be used with all Lunmar boat house kits.
1/2" Galvanized Shackle
1/2" Galvanized Shackle
1/2" x
2" HDG Bolt
Grade 2. Hot Dipped Galvanized (HDG).
1/4" Vinyl Coated Galvanized Cable
7000 lbs. Breaking Strength. 7x19 Clear Coated. Price is PER FOOT.
1/4" Vinyl Coated Stainless Steel Cable
7000 lbs. Breaking Strength. 7 x 19 Clear Coated. Price is PER FOOT.
10# Cable Weight
10# lead weight, attaches to 560 pulley.
100' Stainless Steel Cable Upgrade
1/4" STAINLESS STEEL CABLE
This cable upgrade is also for any 3000 # or 4000 # Lifts, if you need extra feet of cable.
1000# Lunmar Davit (Piling Mount)
Price is for EACH Davit. Standard Height -- 7', Usable Reach -- 5', Standard Cable Length -- 30' of 3/16. Attaches to 9" piling. Must be 36" above dock minimum.
1000# Lunmar Davit (Seawall Mount)
Price is for EACH Davit. Standard Height -- 7', Usable Reach -- 5', Standard Cable Length -- 30' of 3/16, Base Dimensions -- 24" x 24".
102G Strap Bearing
For 2" Pipe with (2) Grease Zerts. Internal Diameter is 2 3/8".
3/16" Galvanized Cable
4200 lbs. Breaking Strength. 7 X 19 Price is PER FOOT.
3/16" Stainless Steel Cable
3700 lbs. Breaking Strength. 7 X 19 304 Price is PER FOOT.
3/4 HP Motor
3/4 HP Motor Only (56 frame)
Direct Replacement for AMS 3000 and ACE 2800
MOST POPULAR
3/4" Coupling Nuts
Hot Dipped Galvanized
3/8" x 4 1/2" HDG Carriage Bolts
Grade 2. Hot Dipped Galvanized (HDG).
4000# (CL) Wood Mount Cradle Boat Lift
4000lb Wood Mount
Cradle Boat Lift
4000# SL Wood Mount Sling Boat Lift
4000lb Wood Mount
Sling Boat Lift
4000# Sling Kit {Wood Mount} -- Center Pipe Configuration
4200# Piling Mount (Low-Profile) Cradle Boat Lift
4200lb Low Profile
Piling Mount Cradle Boat Lift
5 1/4" x 3/4"
Drive Pulley - 5 1/4" x 3/4". Standard motor pulley with 4L260 Belt.
5/16" Double Braided Nylon Rope (600' Spool)
Approximate Tensile Strength 3400#.
5/8" x 3 1/2" HDG Bolts
Grade 2. Hot Dipped Galvanized(HDG).
560 IBeam Pulley
Designed to clamp around a 4", 5", and 6" IBeam. Comes with deadman plate and thimble.
6" Piling Cap
6" x 9' Galvanized Cradle Beam
7500# Capacity. Shown with optional chock bracket.
7500# I-Beam Mount Cradle Kit Boat Lift
The I-Beam kits are desinged to clamp to an existing i-beam. This lift allows you to attach all components to the overhead beams without having to drill any holes. This lift comes complete with all nec parts except for the 1 1/2 pipes and bunk boards.
7500# I-Beam Mount Sling Kit Boat Lift
The I-Beam kits are desinged to clamp to an existing i-beam. This lift allows you to attach all components to the overhead beams without having to drill any holes. This lift comes complete with all nec parts except for the 1 1/2 pipes.
8" x 10' Aluminum Cradle Beam
12,000# Capacity with end plates. This item may take 10 days to ship.
8000# Aluminum Piling Mount Boat Lift
Aluminum Piling Mount Boat Lift
(8000# Piling Mount)
Aluminum and stainless steel construction.
834 Galvanized Pontoon Chock Bracket
Clamps to I-beam with flange width less than 4". Uses (4) 2x4 or 2x6 (not provided). Adjusts to fit all pontoon boats. Standard pontoons uses (4) brackets and tri-toons use (6) brackets.
Aluminum Dock Ladder
Fabricated from marine grade aluminum. Each step measures 1' increments from top of dock. Most durable and economical.
Aluminum Lifting Ladder
Fabricated from marine grade aluminum. Each step measures 1' increments from top of dock. Rungs slide up and down allowing bottom rungs to be kept out of the water.
Magnum 6,000# Lift
Standard featuresof the side mount include (2) Heavy Duty Hefty Hoist worm gear winches. All cables are stainless steel and the load beams ride up and down the elevator track on a series of heavy duty phenolic wheels.
MiniMag 1500#
(MANUAL)
Weight Capacity -- 1500 lbs., Arm Length -- 5', Arm Width -- 3', Piling Requirement -- 8" round or 6" square, track length 8', travel 6', Track available in 8', 10', 12'.
Quick Release Bracket
This bracket is designed to bolt down to the dock so the ladders can quickly and easily be removed.
1/4" Vinyl Coated Galvanized Cable (250' Spool)
7000 lbs. Breaking Strength. 7x19 Clear Coated.
1/4" Vinyl Coated Stainless Steel Cable (250' Spool)
7000 lbs. Breaking Strength. 7 x 19 Clear Coated.
3/16" Galvanized Cable (250' Spool)
3/16" Galvanized Cable (250' Spool). 4200 lbs. Breaking Strength. 7 X 19
3/16" Stainless Steel Cable (250' Spool)
3700 lbs. Breaking Strength. 7 X 19 304
5/16" Double Braided Nylon Rope (1200' Spool)
Approximate Tensile Strength 3400#
6" x 10' Galvanized Cradle Beam
7500# Capacity. Shown with optional chock bracket.
8" x 11' Aluminum Cradle Beam
12,000# Capacity with end plates.
AMS 4000 Gearplate Only
AMS 4000 Gearplate Only. Hot Dipped Galvanized Backplate. Comes with 10" Pulley and Belt.
MiniMag 1500# (ELECTRIC)
Weight Capacity -- 1500 lbs., Arm Length -- 5', Arm Width -- 3', Piling Requirement -- 8" round or 6" square, track length 8', travel 6', Track available in 8', 10', 12'.
Mounting Bracket for #102
(2-required for each 102) sold individually
1/4" Vinyl Coated Galvanized Cable (500' Spool)
7000 lbs. Breaking Strength. 7x19 Clear Coated.
1/4" Vinyl Coated Stainless Steel Cable (500' Spool)
7000 lbs. Breaking Strength. 7 x 19 Clear Coated.
3/16" Galvanized Cable (500' Spool)
3/16" Galvanized Cable (500' Spool). 4200 lbs. Breaking Strength. 7 X 19
3/16" Stainless Steel Cable (500' Spool)
3700 lbs. Breaking Strength. 7 X 19 304
6" x 11' Galvanized Cradle Beam
10,000# Capacity. Shown with optional chock bracket. This item may take 10 days for shipment.
8" x 12' Aluminum Cradle Beam
12,000# Capacity with end plates. This item may take 10 days to ship.
1/4" Vinyl Coated Galvanized Cable (1,000' Spool)
7000 lbs. Breaking Strength. 7x19 Clear Coated.
1/4" Vinyl Coated Stainless Steel Cable (1,000' Spool)
7000 lbs. Breaking Strength. 7 x 19 Clear Coated.
3/16" Galvanized Cable (1,000' Spool)
3/16" Galvanized Cable (1,000' Spool). 4200 lbs. Breaking Strength. 7 X 19
3/16" Stainless Steel Cable (1,000' Spool)
3700 lbs. Breaking Strength. 7 X 19 304
6" x 12' Galvanized Cradle Beam
10,000# Capacity. Shown with optional chock bracket. This item may take 10 days for shipment.
8" x 12'6" Aluminum Cradle Beam
12,000# Capacity with end plates. This item may take 10 days to ship.
1/4" Vinyl Coated Galvanized Cable (5,000' Spool)
7000 lbs. Breaking Strength. 7x19 Clear Coated.
1/4" Vinyl Coated Stainless Steel Cable (5,000' Spool)
7000 lbs. Breaking Strength. 7 x 19 Clear Coated.
3/16" Galvanized Cable (5,000' Spool)
3/16" Galvanized Cable (5,000' Spool). 4200 lbs. Breaking Strength. 7 X 19
3/16" Stainless Steel Cable (5,000' Spool)
3700 lbs. Breaking Strength. 7 X 19 304
6" x 13'4" Galvanized Overhead Beam
Boat House Lifts. 6" x 13'4" beam is designed to be used when there are no supports running perpindicular to boat. Beam replaces 2x12's that are required in wood mount kit. Can be used with all Lunmar boat house kits.
Aluminum Bunk
Aluminum bunk is 2" wide x 8" tall x 12' long. Comes with polyethelyne bunk pads. Best if used with 834A chock brackets. Price is for each bunk, two bunks are required.
1" Coupling Nuts
Hot Dipped Galvanized
1/2" x 2 1/2" HDG Bolt
Grade 2. Hot Dipped Galvanized (HDG).
1/4" Galvanized Cable
7000 lbs. Breaking Strength. 7 X 19 Price is PER FOOT.
1/4" Stainless Steel Cable
6400 lbs. Breaking Strength. 7 X 19 304 Price is PER FOOT.
10" x 11' Aluminum Cradle Beam
16,000# Capacity with end plates. This item may take 10 days to ship.
10# Cable Weight with Bolt
10# lead weight, attaches to 560 pulley.
10,000# Aluminum Piling Mount Boat Lift
Aluminum Piling Mount Boat Lift
(10,000# Piling Mount)
Aluminum and stainless steel construction.
102 G Strap Bearing for I-Beam
102G for I-Beam for 2" ID pipe. Internal Diameter is 2 3/8".
120' Stainless Steel Cable Upgrade
1/4" STAINLESS STEEL CABLE
This cable upgrade is ONLY for L6000SL.
1HP AOS Motor RD - TENV w/Switch, GFCI, & Wire
1HP AOS Motor RD - TENV w/Switch, GFCI, & Wire 56 Frame
Direct Replacement for AMS 4000 and ACE 4000
MOST POPULAR
2000# Lunmar Davit (Piling Mount)
Price is for EACH Davit. Standard Height -- 8', Usable Reach -- 6', Standard Cable Length -- 35' of 1/4, Attaches to 9" piling. Must be 36" above dock minimum.
2000# Lunmar Davit (Seawall Mount)
Price is for EACH Davit. Standard Height -- 8', Usable Reach -- 6', Standard Cable Length -- 35' of 1/4, Base Dimensions -- 24" x 24".
3/8" Double Braided Nylon Rope (600' Spool)
Approximate Tensile Strength 4400#.
5/16" Vinyl Coated Galvanized Cable
9800 lbs. Breaking Strength. 7x19 Clear Coated. Price is PER FOOT.
5/16" Vinyl Coated Stainless Steel Cable
9800 lbs. Breaking Strength. 7 x 19 Clear Coated. Price is PER FOOT.
5/8" Galvanized Shackle
5/8" x 4" HDG Bolt
Grade 2. Hot Dipped Galvanized(HDG).
5600# Piling Mount Cradle Boat Lift
5600lb Piling Mount
Cradle Boat Lift
Best Value!!
5600# Piling Mount Sling Boat Lift
5600lb Piling Mount
Sling Boat Lift
Best Value
560A Pulley (All Aluminum)
This pulley has an all aluminum case and sheave, oilite bushings, stainless hardware.
6 1/2" Piling Cap
6" x 3/4"
Drive Pulley - 6" x 3/4". Standard motor pulley with 4L280 Belt and 4L240 Belt.
6000# (CL) Wood Mount Cradle Boat Lift
6000lb Wood Mount
Cradle Boat Lift
6000# SL Wood Mount Sling Boat Lift
6000lb Wood Mount
Sling Boat Lift
6000# Sling Kit {Wood Mount} -- Center Pipe Configuration
AMS 1000
Motor--1/3hp, 120V ODP. Wiring--14 gauge (weatherproof). Plate--stainless steel backplate. Gear--6
Magnum 8,000# Lift
Standard featuresof the side mount include (2) Heavy Duty Hefty Hoist worm gear winches. All cables are stainless steel and the load beams ride up and down the elevator track on a series of heavy duty phenolic wheels.
MiniMag 1200# Swivel (MANUAL)
1200# capacity rotates 180. Must attach to an 8" piling that must be cut off 6" above dock. Comes standard with 8' track (6' travel).
PWC Dolly
1000# capacity dolly. All aluminum construction with rubber bunk pads.Lunmar aluminum PWC dolly. 1000# capacity. Rubber bunk pads. 4" casters. Universal design fits all PWC's.
Set of (8) 16" Aluminum Chock Bracket
Aluminum chock bracket set- comes with 8 16" aluminum brackets, 8 1/2 x 6" stainless bolts, 8 1/2 x 3 stainless bolts. Designed to clamp around cradle beams up to 5" wide and 7" tall.
1/4" Galvanized Cable (250' Spool)
7000 lbs. Breaking Strength. 7 X 19
1/4" Stainless Steel Cable (250' Spool)
6400 lbs. Breaking Strength. 7 X 19 304
10" x 14' Aluminum Cradle Beam
16,000# Capacity with end plates. This item may take 10 days to ship.
3/8" Double Braided Nylon Rope (1200' Spool)
Approximate Tensile Strength 4400#.
5/16" Vinyl Coated Galvanized Cable (250' Spool)
9800 lbs. Breaking Strength. 7x19 Clear Coated.
5/16" Vinyl Coated Stainless Steel Cable (250' Spool)
9800 lbs. Breaking Strength. 7 x 19 Clear Coated.
MiniMag 1200# Swivel (ELECTRIC)
1200# capacity rotates 180. Must attach to an 8" piling that must be cut off 6" above dock. Comes standard with 8' track (6' travel).
1/4" Galvanized Cable (500' Spool)
7000 lbs. Breaking Strength. 7 X 19
1/4" Stainless Steel Cable (500' Spool)
6400 lbs. Breaking Strength. 7 X 19 304
5/16" Vinyl Coated Galvanized Cable (500' Spool)
9800 lbs. Breaking Strength. 7x19 Clear Coated.
5/16" Vinyl Coated Stainless Steel Cable (500' Spool)
9800 lbs. Breaking Strength. 7 x 19 Clear Coated.
MiniMag 1500# (ELECTRIC)DUAL
Weight Capacity -- 1500 lbs., Arm Length -- 8', Arm Width -- 3', Piling Requirement -- 8" round or 6" square. Track length 8'. Travel 6'. Tracks available up to 15' (13' of travel).
1/4" Galvanized Cable (1,000' Spool)
7000 lbs. Breaking Strength. 7 X 19
1/4" Stainless Steel Cable (1,000' Spool)
6400 lbs. Breaking Strength. 7 X 19 304
5/16" Vinyl Coated Galvanized Cable (1,000' Spool)
9800 lbs. Breaking Strength. 7x19 Clear Coated.
5/16" Vinyl Coated Stainless Steel Cable (1,000' Spool)
9800 lbs. Breaking Strength. 7 x 19 Clear Coated.
1/4" Galvanized Cable (5,000' Spool)
7000 lbs. Breaking Strength. 7 X 19
1/4" Stainless Steel Cable (5,000' Spool)
6400 lbs. Breaking Strength. 7 X 19 304
5/16" Vinyl COated Galvanized Cable (5,000' Spool)
9800 lbs. Breaking Strength. 7x19 Clear Coated.
5/16" Vinyl Coated Stainless Steel Cable (5,000' Spool)
9800 lbs. Breaking Strength. 7 x 19 Clear Coated.
MiniMag 1500# (MANUAL)
DUAL
Weight Capacity -- 1500 lbs., Arm Length -- 8', Arm Width -- 3', Piling Requirement -- 8" round or 6" square. Track length 8'. Travel 6'. Tracks available up to 15' (13' of travel).
1/2" x 3" HDG Bolt
Grade 2. Hot Dipped Galvanized (HDG).
1/4" Stainless Wire Rope Clip
Stainless Steel
102ABearing
Pipe bearing designed to accept 2" id schedule 40 galv pipe. Internal Diameter is 2 3/8".
140' Stainless Steel Cable Upgrade
1/4" STAINLESS STEEL CABLE
This cable upgrade is for L6000CL, L6000CLSM, L6000PC.
15,000# Aluminum Piling Mount Boat Lift
Aluminum Piling Mount Boat Lift
(15,000# Piling Mount)
Aluminum and stainless steel construction.
1HP AOS Motor HD - TENV w/Switch, GFCI, & Wire
1HP AOS Motor HD - TENV w/Switch, GFCI, & Wire
Direct Replaceement for AMS 6500
3000# Lunmar Davit [Marco] - Electric (Seawall Mount)
Price is for EACH Davit. Standard Height -- 8 1/2', Usable Reach -- 7', Standard Cable Length -- 35' of 1/4, Base Dimensions -- 24" x 24".
5/16" Galvanized Cable
9800 lbs. Breaking Strength. 7 X 19 Price is PER FOOT.
5/16" Stainless Steel Cable
9000 lbs. Breaking Strength. 7 x 19 304 Price is PER FOOT.
5/8" x 4 1/2" HDG Bolt
Grade 2. Hot Dipped Galvanized(HDG).
5600# Piling Mount (Low Profile) Cradle Boat Lift
5600lb Low Profile
Piling Mount Cradle Boat Lift
7" Piling Cap
7" x 3/4"
Drive Pulley - 7" x 3/4". Standard motor pulley for AMS 1000 and 1250 gearboxes with 4L300 Belt and 4L260 Belt.
7/16" Double Braided Nylon Rope (600' Spool)
Approximate Tensile Strength 5900#.
7500# (CL) Wood Mount Cradle Boat Lift
7500lb Wood Mount
Cradle Boat Lift
7500# SL Wood Mount Sling Boat Lift
7500lb capacity
Sling Boat Lift Kit
(Wood Mount)
AMS 1250
Motor--1/2hp, 120V ODP. Wiring--14 gauge (weatherproof). Plate--stainless steel backplate. Gear--6" cast 48 to 1. Hoist Speed--4.0 vertical feet per min.
Dock Mount Bracket for Minimags
Designed to be used on Minimag 800 and 1500 when your piling is cut off flush with dock.
GEM 2 Motor Remote Control
For use on dual motor boat lifts. 120V/240V single phase AC, 25 amps (two 1-1/2HP motors) can be controlled manually or by radio remote (range approx. 100 ft.).
Guide Post Bracket
Bracket clamps to 4",5" & 6" cradle beams. Guides boat onto cradle. 2" schedule 40 7' long pvc pipes not included. All parts hot dipped galvanized.
Heavy Duty Dock Hinge
All Hot Dipped Galvanized. Rotates 220 degrees. Rated for 2,000#.
Magnum 10,000# Lift
Standard featuresof the side mount include (2) Heavy Duty Hefty Hoist worm gear winches. All cables are stainless steel and the load beams ride up and down the elevator track on a series of heavy duty phenolic wheels.
Replacement Tracks
The Replacement tracks are for when your other track goes bad. How to know what size to get measure from the dock to the mud + 2'. You at least need 2' above dock that is why we add 2'.
5/16" Galvanized Cable (250' Spool)
9800 lbs. Breaking Strength. 7 X 19
5/16" Stainless Steel Cable (250' Spool)
9000 lbs. Breaking Strength. 7 x 19 304
7/16" Double Braided Nylon Rope (1200' Spool)
Approximate Tensile Strength 5900#.
5/16" Galvanized Cable (500' Spool)
9800 lbs. Breaking Strength. 7 X 19
5/16" Stainless Steel Cable (500' Spool)
9000 lbs. Breaking Strength. 7 x 19 304
5/16" Galvanized Cable (1,000' Spool)
9800 lbs. Breaking Strength. 7 X 19
5/16" Stainless Steel Cable (1,000' Spool)
9000 lbs. Breaking Strength. 7 x 19 304
5/16" Galvanized Cable (5,000 Spool)
9800 lbs. Breaking Strength. 7 X 19
5/16" Stainless Steel Cable (5,000' Spool)
9000 lbs. Breaking Strength. 7 x 19 304
1 HP AOS Motor
1 HP Motor Only (56 frame)
Direct Replacement for AMS 4000 and ACE 4000
MOST POPULAR
1/2" Double Braided Nylon Rope (600' Spool)
Approximate Tensile Strength 7800#.
1/2" x 3 1/2" HDG Bolt
Grade 2. Hot Dipped Galvanized (HDG).
1/4" Galvanized Thimble
10,000# (CL) Wood Mount Cradle Boat Lift
10,000lb Wood Mount
Cradle Boat Lift
10,000# SL Wood Mount Sling Boat Lift
10,000# Capacity Kit includes 2-AMS 4000 Gearboxes, 2-106 Motor Mounts, 8-109W Sealed Bearings, 4-30' 5/16" S/S Cables, 2- 8"x16' weighted slings, 4-560W Pulleys, 4-5/8 Shackles, 4-Cable Clamps, 2- Cover
1000# Personal Watercraft Lift Bracket
Hot dipped galvanized construction. 2 year warranty
102 V-Bracket
Supports 2" ID galvanized pipe. Bolts to perpindicular beam. Internal Diameter is 2 3/8".
20,000# Aluminum Piling Mount Boat Lift
Aluminum Piling Mount
(20,000# Piling Mount)
Aluminum and stainless steel construction.
3/8" Galvanized Cable
14,400 lbs. Breaking Strength. 7 X 19 Price is PER FOOT.
5/8" x 5" HDG Bolt
Grade 2. Hot Dipped Galvanized(HDG).
5000# Lunmar Davit - Electric (Seawall Mount)
Price is for EACH Davit. Standard Height -- 8 1/2', Usable Reach -- 6', Standard Cable Length -- 35' of 1/4, Base Dimensions -- 24" x 24".
7 1/2" Piling Cap
7000# Piling Mount Cradle Lift
7000lb Piling Mount
Cradle Boat Lift
8" x 3/4"
Drive Pulley - 8" x 3/4". Standard motor pulley with 4L320 Belt and 4L280 Belt.
AMS 1500
Motor--3/4hp, 120V ODP. Wiring--14 gauge (weatherproof). Plate--stainless steel backplate. Gear--6" cast 48 to 1. Hoist Speed--4.0 vertical feet per min.
Corner Bracket
5" x 3" x 3" galvanized angle with four holes for 3/8" bolts.
GEM 4 Motor Remote Control
For use on four motor boat lifts. 240V single phase, up to 40 amps (four 1-1/2HP). Each motor has its own off switch for easy leveling of the lift, can be controlled manually or by radio (range approx. 100 ft.).
Hinged Dock Extension
2' Wide x 3' Long. All Aluminum.
1/2" Double Braided Nylon Rope (1200' Spool)
Approximate Tensile Strength 7800#.
3/8" Galvanized Cable (250' Spool)
14,400 lbs. Breaking Strength. 7 X 19
3/8" Galvanized Cable (500' Spool)
14,400 lbs. Breaking Strength. 7 X 19
3/8" Galvanized Cable (1,000' Spool)
14,400 lbs. Breaking Strength. 7 X 19
3/8" Galvanized Cable (5,000' Spool)
14,400 lbs. Breaking Strength. 7 X 19
1/2" Galvanized Cable (250' Spool)
1/2" Diameter. 20,700 lbs. Breaking Strength. 6x19
1/2" x 4" HDG Bolt
Grade 2. Hot Dipped Galvanized (HDG).
10' White Dock Bumper 290-A
Our dock bumpers are made from a specially formulated PVC compound which provides maximum protection against weather, fungus, and uv rays.
10' White Dock Bumper 300-A
Our dock bumpers are made from a specially formulated PVC compound which provides maximum protection against weather, fungus, and uv rays.
10" x 3/4"
Drive Pulley - 10" x 3/4". Standard motor pulley AMS 3000 & 4000 gearboxes with 4L360 Belt.
102 X Strap Bearing
For 2" Pipe with (2) Grease Zerts. Internal Diameter 2 3/8".
12,500 (CL) - Cradle Kit (Wood Mount)
1HP AOS HD Motor - TENV
1HP AOS HD Motor ONLY - TENV
Direct Replacement for AMS 6500
3/8" Stainless Steel Cable
12,000 lbs. Breaking Strength. 7 X 19 304 Price is PER FOOT.
5/16" Galvanized Thimble
5/8" x 5 1/2" HDG Bolt
Grade 2. Hot Dipped Galvanized(HDG).
5500# Lunmar Davit - Electric (Seawall Mount)
Price is for EACH Davit. Standard Height -- 9', Usable Reach -- 6 3/4', Standard Cable Length -- 35' of 5/16, Base Dimensions -- 24" x 24".
7000# Piling Mount (Low Profile) Cradle Boat Lift
7000lb Low Profile
Piling Mount Cradle Boat Lift
8" Piling Cap
9/16" Double Braided Nylon Rope (600' Spool)
Approximate Tensile Strength 8900#.
AMS 2000
Motor--3/4 hp, 120v, odp. Wiring--14 Gauge (weatherproof). Plate--1/4" steel 9.5"x19.5" galvanized. Gear--8" cast 60 tooth, precision machined. Hoist Speed--4.0 vertical feet per min. (Comes With Cover.)
Auto Stop
Must work in conjunction with GEM 1, GEM 2, or GEM 4. Automatically stops lift at lower and upper positions.
1/2" Galvanized Cable (500' Spool)
1/2" Diameter. 20,700 lbs. Breaking Strength. 6x19
3/8" Stainless Steel Cable (250' Spool)
12,000 lbs. Breaking Strength. 7 X 19 304
9/16" Double Braided Nylon Rope (1200' Spool)
Approximate Tensile Strength 8900#.
1/2" Galvanized Cable (1,000' Spool)
1/2" Diameter. 20,700 lbs. Breaking Strength. 6x19
3/8" Stainless Steel Cable (500' Spool)
12,000 lbs. Breaking Strength. 7 X 19 304
3/8" Stainless Steel Cable (1,000' Spool)
12,000 lbs. Breaking Strength. 7 X 19 304
3/8" Stainless Steel Cable (5,000 Spool)
12,000 lbs. Breaking Strength. 7 X 19 304
1 1/2HP AOS Motor - TENV w/Switch, GFCI, & Wire
1 1/2HP AOS Motor - TENV w/Switch, GFCI, & Wire
Direct Replacement for AMS 8500
1/2" Stainless Steel Cable (250' Spool)
1/2" Diameter. 22,800 lbs. Breaking Strength. 6x25
1/2" x 4 1/2" HDG Bolt
Grade 2. Hot Dipped Galvanized (HDG).
102SB 1 1/2" Sealed Bearing
Sealed bearing for 1 1/2" ID Pipe. Hot dipped galvanized frame with permanently sealed bearing. Use with two 108's if mounting to perpendicular wood beams.
12" x 3/4"
Drive Pulley - 12" x 3/4". Add 20% capacity to the 3000 gearbox with 4L400 Belt.
24 Safety Latch Hook
4" Galvanized Cleat
height 7/8" length 4"
5/8" Double Braided Nylon Rope (600' Spool)
Approximate Tensile Weight 14,700#.
5/8" Galvanized Cable (250' Spool)
5/8" Diameter. 32,200 lbs. Breaking Strength. 6x19
5/8" x 6" HDG Bolts
Grade 2. Hot Dipped Galvanized(HDG).
8 1/2" Piling Cap
AMS 6500
Motor--1 hp,120/240V,15 amps, TENV, wiring--14 Gauge (weatherproof). Galvanized Plate--1/4" steel 12x24". Gear--12" heavy duty cast precision machined. Hoist Speed--3.0 vertical feet per min. (faster speeds available).
Magnum 8,000# "HD" Lift
The "HD" model is designed to afford maximum hull support while keeping a low profile appearance. The design allows for easy access to your vessel because it is positioned inches away from your dock. Standard "HD" model is a fully adjustable I-Beam bunking system to gently cradle your boat.
Magnum 8,000# "S" Lift
The "S" Model is designed to afford maximum hull support while keeping a low profile appearance. This design allows for easy access to your vessel because it positioned inches away from your dock.
1/2" Stainless Steel Cable (500' Spool)
1/2" Diameter. 22,800 lbs. Breaking Strength. 6x25
5" Galvanized Cleat
1 1/16" height 5" length
5/8" Double Braided Nylon Rope (1200' Spool)
Approximate Tensile Strength 14,700#.
5/8" Galvanized Cable (500' Spool)
5/8" Diameter. 32,200 lbs. Breaking Strength. 6x19
1/2" Stainless Steel Cable (1,000' Spool)
1/2" Diameter. 22,800 lbs. Breaking Strength. 6x25
5/8" Galvanized Cable (1,000' Spool)
5/8" Diameter. 32,200 lbs. Breaking Strength. 6x19
6" Galvanized Cleat
1 1/2" height 6" length
8" Galvanized Cleat
1 11/16" height 8" length
10" Galvanized Cleat
2 3/8" height 10" length
12" Galvanized Cleat
3 3/8" height 12" length
1 1/2 HP Motor -TENV
1 1/2 HP Motor -TENV
Direct Replacment for AMS 8500
1/2" x 5" HDG Bolt
Grade 2. Hot Dipped Galvanized (HDG).
2MA2.6 x 5/8" Motor Pulley Steel (Duel)
2MA2.6 x 5/8" Motor Pulley Steel (Duel). Direct replacement for AMS 6500# and 8500# gearboxes.
3/4" Double Braided Nylon Rope (600' Spool)
Approximate Tensile Weight 17,800#.
3/4" Galvanized Cable (250' Spool)
3/4" Diameter. 46,000 lbs. Breaking Strength. 6x19
5/8" Stainless Steel Cable (250' Spool)
5/8" Diameter. 35,000 lbs. Breaking Strength. 6x25
5/8" x 7" HDG Bolt
Grade 2. Hot Dipped Galvanized(HDG).
9" Piling Cap
AMS 8500
Motor--1.5 hp,120/240V, TENV. Wiring--12 Gauge (weatherproof). Galvanized Plate--1/4" steel 12x24". Gear--12" heavy duty cast precision machined. Hoist Speed--2.8 vertical feet per min. (faster speeds available).
Magnum 10,000# "S" Lift
The "S" model is designed to afford maximum hull support while keeping a low profile appearance. The design allows for easy access to your vessel because it is positioned inches away from your dock.
Pillow Block Bearing
10,000# Capacity. For 2" ID Pipe.
Safety Latch Hook Repair
3/4" Double Braided Nylon Rope (1200' Spool)
Approximate Tensile Strength 17,800#.
3/4" Galvanized Cable (500' Spool)
3/4" Diameter. 46,000 lbs. Breaking Strength. 6x19
5/8" Stainless Steel Cable (500' Spool)
5/8" Diameter. 35,000 lbs. Breaking Strength. 6x25
3/4" Galvanized Wire Rope (1,000' Spool)
3/4" Diameter. 46,000 lbs. Breaking Strength. 6x19
5/8" Stainless Steel Cable (1,000' Spool)
5/8" Diameter. 35,000 lbs. Breaking Strength. 6x25
1/2" x 5 1/2" HDG Bolt
Grade 2. Hot Dipped Galvanized (HDG).
2MAL11.2 Drive Pulley (Duel) (Needs #1461)
2MAL11.2 Drive Pulley (Duel) (Needs #1461). Direct replacement for AMS 6500# and 8500# gearboxes with (2) AX37 Belts.
3/4" Stainless Steel Cable (250' Spool)
3/4" Diameter. 46,000 lbs. Breaking Strength. 6x25
5/8" x 8" HDG Bolt
Grade 2. Hot Dipped Galvanized(HDG).
7/8" Double Braided Nylon Rope (600' Spool)
Approximate Tensile Weight 22,900#.
9 1/2" Piling Cap
Cable Spreader
3000# Cap. Attachs to lift rings on boat stern. Hardware stainless & galv. For saltwater use. Includes shackle to connect to cable/pulley with hooks to attach to boat . Cables covered in clear vinyl. Length is for each leg. Heavier capacities available.
Galvanized Backplate for AMS Gearboxes
Upgrade from a painted backplated to a hot dipped galvanized backplate, which eliminates rust and corrosion.
Grease Gutters
Stops grease from dripping on boat. Continually lubricates, reducing wear on your lift's bearings and motor. Comes in a set of 4.
3/4" Stainless Steel Cable (500' Spool)
3/4" Diameter. 46,000 lbs. Breaking Strength. 6x25
3/4" Stainless Steel Cable (1,000' Spool)
3/4" Diameter. 46,000 lbs. Breaking Strength. 6x25
1 1/2" Sealed Bearing
For 1 1/2" ID Pipe. 1.987 Bearing ID. E Coated
1" Double Braided Nylon Rope (600' Spool)
Approximate Tensile Weight 29,500#.
1/2" x 6" HDG Bolt
Grade 2. Hot Dipped Galvanized (HDG).
10" Piling Cap
5/8" x 9" HDG Bolt
Grade 2. Hot Dipped Galvanized(HDG).
MA2.6 x 5/8" Motor Pulley Steel (Single)
MA2.6 x 5/8" Motor Pulley Steel (Single).Direct replacement for AMS 6500 & 8500 gearboxes.
1 1/8" Double Braided Nylon Rope (600' Spool)
Approximate Tensile Weight 42,000#.
1/2" x 7" HDG Bolt
Grade 2. Hot Dipped Galvanized
10 1/2" Piling Cap
5/8" x 10" HDG Bolt
Grade 2. Hot Dipped Galvanized(HDG).
MFAL10.4 x 3/4" Drive Pulley (Single)
MFAL10.4 x 3/4" Drive Pulley (Single).Direct replacement for AMS 6500 gearbox with AX35 Belt.
1 1/4" Doube Braided Nylon Rope (600' Spool)
Approximate Tensile Weight 51,000#.
1/2" x 8" HDG Bolt
Grade 2. Hot Dipped Galvanized (HDG).
11" Piling Cap
5/8" x 11" HDG Bolt
Grade 2. Hot Dipped Galvanized(HDG).
MFAL11.4 x 3/4" Drive Pulley (Single)
MFAL11.4 x 3/4" Drive Pulley (Single). Direct replacement for AMS 8500 gearbox with AX36 Belt.
1 3/8" Double Braided Nylon Rope (400' Spool)
Approximate Tensile Weight 55,700#.
1/2" x 9" HDG Bolt
Grade 2. Hot Dipped Galvanized (HDG).
11 1/2" Piling Cap
5/8" x 12" HDG Bolt
Grade 2. Hot Dipped Galvanized(HDG).
1 1/2" Double Braided Nylon Rope (300' Spool)
Approximate Tensile Weight 72,000#.
1/2" x 10" HDG Bolt
Grade 2. Hot Dipped Galvanized (HDG).
12" Piling Cap
5/8" x 13" HDG Bolt
Grade 2. Hot Dipped Galvanized(HDG).
1 5/8" Double Braided Nylon Rope (300' Spool)
1/2" x 11" HDG Bolt
Grade 2. Hot Dipped Galvanized (HDG).
12 1/2" Piling Cap
5/8" x 14" HDG Bolt
Grade 2. Hot Dipped Galvanized (HDG).
1 3/4" Doube Braided Nylon Rope (300' Spool)
1/2" x 12" HDG Bolt
Grade 2. Hot Dipped Galvanized (HDG).
13" Piling Cap
1/2" x 13" HDG Bolt
Grade 2. Hot Dipped Galvanized (HDG).
13 1/2" Piling Cap
2" Double Braided Nylon Rope (300' Spool)
1/2" x 14" HDG Bolt
Grade 2. Hot Dipped Galvanized (HDG).
14" Piling Cap
14 1/2" Piling Cap
15" Piling Cap
15 1/2' Piling Cap
16" Piling Cap
16 1/2" Piling Cap
17" Piling Cap
17 1/2" Piling Cap
18" Piling Cap
1 1/2" Bearing Flange (Black)
4 bolt flange designed to support 1 1/2" sealed bearing. Requires (2). Sold Individually. Unfinished.
1 1/2" Bearing Flange (Galvanized)
4 bolt flange designed to support 1 1/2" sealed bearing. Requires (2). Sold Individually.
1 1/2" Cable Winder
1 1/2" cable winder. Fits over 1-1/2" ID pipe. 18" long X 1.97" internal diameter. Machined aluminum. Can be cut with hacksaw. Fits 1/4", 5/16", and 3/8" cable. Custom sizes available.
1 1/2" Split Cable Winder
Cable Winder for 1-1/2" Pipe (Split). Fits over 1-1/2" ID pipe. Split for easy installation. 18" long X 1.97" internal diameter. Machined aluminum. Can be cut with a hacksaw. Fits 1/4", 5/16", and 3/8" cable. Split in half for retro fit installation. Custom sizes available.
1/4" x 15' Readimade Galvanized Cable
1/4" x 15' Readimade Stainless Steel Cable
1/4" x 20' Readimade Galvanized Cable
1/4" x 20' Readimade Stainless Steel Cable
1/4" x 25' Galvanized Cable
This replacement cable is for 7500 sling or cradle lifts.
1/4" x 25' Readimade Galvanized Cable
1/4" x 25' Readimade Stainless Steel Cable
1/4" x 25' Stainless Steel Cable
This replacement cable is for 7500 sling or cradle lifts
1/4" x 30' Readimade Galvanized Cable
1/4" x 30' Readimade Stainless Steel Cable
1/4" x 35' Readimade Galvanized Cable
1/4" x 35' Readimade Stainless Steel Cable
1/4" x 40' Galvanized Cable
This replacement cable is for 3000 and 4000 sling or cradle lifts.
1/4" x 40' Readimade Galvanized Cable
1/4" x 40' Readimade Stainless Steel Cable
1/4" x 40' Stainless Steel Cable
This replacement cable is for 3000 and 4000 sling or cradle lifts.
1/4" x 45' Readimade Galvanized Cable
1/4" x 45' Readimade Stainless Steel Cable
1/4" x 50' Readimade Galvanized Cable
1/4" x 50' Readimade Stainless Steel Cable
1/4" x 70' Galvanized Cable
This replacement cable is for 6000 sling or cradle lifts.
1/4" x 70' Stainless Steel Cable
This replacement cable is for 6000 sling or cradle lifts.
10,000# I-Beam Mount Cradle Kit Boat Lift
The I-Beam kits are desinged to clamp to an existing i-beam. This lift allows you to attach all components to the overhead beams without having to drill any holes. This lift comes complete with all nec parts except for the 1 1/2 pipes and bunk boards.
10,000# I-Beam Mount Sling Kit Boat Lift
The I-Beam kits are desinged to clamp to an existing i-beam. This lift allows you to attach all components to the overhead beams without having to drill any holes. This lift comes complete with all nec parts except for the 1 1/2 pipes.
1000# Brake Winch
12 Volt Motor Upgrade
12" Black Dock Wheel
This is a single 12" Black Dock Wheel. Use this as a replacement for another wheel that you purchased with a kit, or to create your own bracket.
No need to buy this with another kit because its already included!
12" DOCK WHEEL
Includes bracket, inflatable wheel, and all fasteners.
12" Dock Wheel and a 4" Lip for Corner use.
- The Bracket which is shown as the picture for this item
- 12" Wheel, choose a color either white or black
- All fasteners and attaching hardware needed
12" DOCK WHEEL
H-OCE
Includes bracket, inflatable wheel, and all fasteners
12" Dock Wheel and an Outside Corner End.
- The bracket that is used as the picture for this item
- 12" Wheel comes in either white or black which you must pick one to complete order
- All fasteners and attaching hardware needed
12" DOCK WHEEL STRAIGHT
Includes bracket, inflatable wheel, and all fasteners
12" Wheel and Straight Bracket for a side mount configuration on your dock.
- Includes the bracket shown as the picture for this item
- 12" Dock Wheel which comes in either White or Black
- All fasteners and attaching hardware needed
12" DOCK WHEEL WOOD DOCK
Includes bracket, inflatable wheel, and all fasteners
12" Dock Wheel and 1 1/2" Lip for Corner use. Sometimes the 4" Lip is too long and interferes with the hardware, so 1 1/2" Lip will work in those cases.
- Includes bracket as shown in the picture for this item
- 12" Dock Wheel which comes in White or Black
- All fasteners and attaching hardware needed
12" White Dock Wheel
This is a single 12" White Dock Wheel. Use this as a replacement for another wheel that you purchased with a kit, or to create your own bracket.
No need to buy this with another kit because its already included!
12,500# I-Beam Mount Cradle Kit Boat Lift
The I-Beam kits are desinged to clamp to an existing i-beam. This lift allows you to attach all components to the overhead beams without having to drill any holes. This lift comes complete with all nec parts except for the 1 1/2 pipes and bunk boards.
12,500# I-Beam Mount Sling Kit Boat Lift
The I-Beam kits are desinged to clamp to an existing i-beam. This lift allows you to attach all components to the overhead beams without having to drill any holes. This lift comes complete with all nec parts except for the 1 1/2 pipes.
135' Stabilizer Angle
Use the H-135 to build in a 45 degree angle on your dock to spread out the load of an attached dock section to a main dock. Use two H-B backup plates per one H-135 to strengthen the dock frame. Use 1/2" carriage bolts for assembly.
15,000# I-Beam Mount Cradle Kit Boat Lift
The I-Beam kits are desinged to clamp to an existing i-beam. This lift allows you to attach all components to the overhead beams without having to drill any holes. This lift comes complete with all nec parts except for the 1 1/2 pipes and bunk boards.
15,000# I-Beam Mount Sling Kit Boat Lift
The I-Beam kits are desinged to clamp to an existing i-beam. This lift allows you to attach all components to the overhead beams without having to drill any holes. This lift comes complete with all nec parts except for the 1 1/2 pipes.
1500# Brake Winch
16' x 3' Galvanized Gangway
Galvanized steel construction. Treated deck boards standard (composite and aluminum available). Heavy duty dock hinge. Roller kit for changing water levels.
2 Level - Stern Platform
2' x 8' 2 Level - Stern Platform
Stern work platforms are available for HD and CBX model boat lifts. They are constructed with a 24 x 26 inch grating platform that extends 4 feet 6 inches beyond the lift beam. Stern platforms make changing the propeller or removing the drain plug a snap.
2' x 3'x 12" Float Drum (Flange Mount)
Buoyancy 300#.
Weight 13#.
2' x 4' x 12" Float Drum (Flange Mount)
Buoyancy 400#. Weight 19#.
2" Cable Winder
Fits over 2" ID pipe. 18" long X 2 3/8" internal diameter. Machined aluminum. Can be cut with hacksaw. Fits 1/4", 5/16", and 3/8" cable. Custom sizes available.
2" Split Cable Winder
Fits over 2" ID pipe. Split for easy installation. 18" long X 2 3/8" internal diameter. Machined aluminum. Can be cut with hacksaw. Fits 1/4", 5/16", and 3/8" cable. Split in half for retro fit installation. Custom sizes available.
20' x 3' Galvanized Gangway
Galvanized steel construction. Treated deck boards standard (composite and aluminum available). Heavy duty dock hinge. Roller kit for changing water levels.
24" x 48" x 12" Permafloat Float Drum
24" x 48" x 16" Permafloat Float Drum
24" x 48" x 20" Permafloat Float Drum
2500# Brake Winch
260 Snatch Block
2 ton galvanized frame and sheave.
260B Snatch Block with Bale
2 ton galvanized frame and sheave.
260L Snatch Block - Long
2 ton, attaches to wood beam, galvanized frame and sheave.
260S Snatch Block with Shackle
2 ton galvanized frame and sheave with shackle.
270 Snatch Block with Shackle and Hook
2 ton, attaches to wood beam, galvanized frame and sheave with shackle and hook.
272 Double Snatch Block
2 ton galvanized sheave and frame.
2'x4'x12" Float Drum
Buoyancy 446#.
Weight 22#.
2'x4'x16" Float Drum
Buoyancy 580#.
Weight 25#.
2'x4'x18" Float Drum
Buoyancy 670#.
Weight 29#.
2'x4'x24" Float Drum
Buoyancy 903#.
Weight 33#.
3' Aluminum Spreader Bar
3000# Capacity. 36" Stainless Drops Standard. Can be shipped UPS. Custom sizes available.
3' Galvanized Spreader Bar
3' spreader bar (4" ibeam). Price includes galvanized cable drops.
3" Inside Corner Pipe
The inside corner with a 3" pipe holder replaces the standard inside corner (H-IC) and creates a place for you to use a 2-1/2" ID pipe (or less) to anchor your dock in place. With an inside corner pipe holder no anchoring hardware protrudes on the outside of your dock. When you use this hardware you will need to cut out a hole in your decking and you will also need to think about where your floats are located (if you are using floats). Use with 1/2" carriage bolts.
3/8" x 5" HDG Carriage Bolts
Grade 2. Hot Dipped Galvanized (HDG).
3/8" x 6" HDG Carriage Bolts
Grade 2. Hot Dipped Galvanized (HDG).
3/8" x 7" HDG Carriage Bolts
Grade 2. Hot Dipped Galvanized (HDG).
30# Bunk Weights
30# Bunk Weights Hot Dipped Galvanized
3000 (CL) - Cradle Kit (Steel Mount)
3000lb capacity
Cradle Boat Lift Kit
(Steel Mount)
3000 (PC) - Pontoon Cradle Kit (Steel Mount)
3000lb capacity
Pontoon Cradle Kit (Wood Mount)
3000 (PC) - Pontoon Cradle Kit {Wood Mount}
3000lb capacity
Pontoon Cradle Kit (Wood Mount)
3000 (SL) - Sling Kit (Steel Mount)
3000lb capacity
Sling Boat Lift Kit
(Steel Mount)
3000# -- 2 Point Pick Up {Wood Mount}
3000lb capacity
2 Point Pick Up
(Wood Mount)
3000# -- 3 Point Pick Up {Wood Mount}
3000lb capacity
3 Point Pick Up
(Wood Mount)
3000# 6" Channel Cradle Boat Lift
3000lb 6" Channel
Cradle Boat Lift
3000# 6" Channel Pontoon Cradle Boat Lift
3000lb 6" Channel
Pontoon Cradle Lift
3000# 6" Channel Sling Boat Lift
3000lb 6" Channel
Sling Boat Lift
3000# CL (Cradle) Aluminum Boat Lift
3000# Aluminum Cradle Lift
3000# SL (Sling) Aluminum Boat Lift
3000# Aluminum Sling Lift
36" x 48" x 12" Permafloat Float Drum
36" x 48" x 16" Permafloat Float Drum
36" x 48" x 20" Permafloat Float Drum
36" x 48" x 24" Permafloat Float Drum
36" x 72" x 16" Permafloat Float Drum
36" x 72" x 20" Permafloat Float Drum
360 L
360 Pulley
3" Sheave. 1 Ton Rating.
3'x 4'x 7" Float Drum
Buoyancy 414#.
Weight 23#.
3'x4'x12" Float Drum
Buoyancy 674#.
Weight 31#.
3'x4'x16" Float Drum
Buoyancy 913#.
Weight 35#.
3'x4'x18" Float Drum
Buoyancy 1028#.
Weight 39#.
3'x4'x24" Float Drum
Buoyancy 1377#.
Weight 52#.
4' Aluminum Spreader Bar
3000# Capacity. 36" Stainless Drops Standard. Can be shipped UPS. Custom sizes available.
4' Galvanized Spreader Bar
4' spreader bar (4" ibeam). Price includes galvanized cable drops.
4' x 25'Finger Pier
MUST BE ATTACHED TO AN EXISTING FLOATING DOCK. DOES NOT STAND ALONE!
4"x12' with lead weights and keel pads
4"x12' nylon slings with weights and keel pads
4"x12' without lead weights and keel pads
4x12 nylon slings without lead weights and keel pads
4"x14' with lead weights and keel pad
4"x14' nylon slings with lead weights and keel pads
4"x14' without lead weights and keel pads
4x14 nylon slings without lead weights and keel pads
4"x16' with lead weights and keel pads
4x16 nylon slings with lead weights and keel pads
4"x16' without weights and keel pads
4x16 nylon slings without lead weights and keel pads
4"x18' with lead weights and keel pads
4x18 nylon slings with lead weights and keel pads
4"x18' without lead weights and keel pads
4x18 nylon slings without lead weights and keel pads
4"x20' with lead weights and keel pads
4x20 nylon slings with lead weights and keel pads
4"x20' without lead weights and keel pads
4x20 nylon slings without lead weights and keel pads
4000 (CL) - Cradle Kit (Steel Mount)
4000lb capacity
Cradle Boat Lift Kit
(Steel Mount)
4000 (PC) - Pontoon Cradle Kit (Steel Mount)
4000lb capacity
Pontoon Cradle Kit (Steel Mount)
4000 (PC) - Pontoon Cradle Kit {Wood Mount}
4000lb capacity
Pontoon Cradle Kit (Steel Mount)
4000 (SL) - Sling Kit (Steel Mount)
4000lb capacity
Sling Boat Lift Kit
(Steel Mount)
4000# - 2 Point Pick Up (Wood Mount)
4000lb capacity
2 Point Pick Up
(Wood Mount)
4000# - 3 Point Pick Up (Wood Mount)
4000lb capacity
3 Point Pick Up
(Wood Mount)
4000# 6" Channel Cradle Boat Lift
4000lb 6" channel
Cradle Boat Lift
4000# 6" Channel Pontoon Cradle Boat Lift
4000lb 6" Channel
Pontoon Cradle Boat Lift
4000# 6" Channel Sling Boat Lift
4000lb 6" channel
sling boat lift
4000# CL (Cradle) Aluminum Boat Lift
4000# Aluminum Cradle Lift
4000# SL (Sling) Aluminum Boat Lift
4000# Aluminum Sling Lift
48" x 48" x 12" Permafloat Float Drum
48" x 48" x 16" Permafloat Float Drum
48" x 48" x 20" Permafloat Float Drum
48" x 48" x 24" Permafloat Float Drum
48" x 72" x 12" Permafloat Float Drum
48" x 72" x 16" Permafloat Float Drum
48" x 72" x 20" Permafloat Float Drum
48" x 72" x 24" Permafloat Float Drum
48" x 96" x 12" Permafloat Float Drum
48" x 96" x 16" Permafloat Float Drum
48" x 96" x 20" Permafloat Float Drum
48" x 96" x 24" Permafloat Float Drum
4'x4'x12" Float Drum
Buoyancy 914#.
Weight 41#.
4'x4'x16" Float Drum
Buoyancy 1202#.
Weight 46#.
4'x4'x18" Float Drum
Buoyancy 1383#.
Weight 52#.
4'x4'x24" Float Drum
Buoyancy 1851#.
Weight 65#.
5' Aluminum Spreader Bar
3000# Capacity. 36" Stainless Drops Standard. Can be shipped UPS. Custom sizes available.
5' Galvanized Spreader Bar
5' spreader bar (4" ibeam). Price includes galvanized cable drops.
5/16" x 15' Readimade Galvanized Cable
5/16" x 15' Readimade Stainless Steel Cable
5/16" x 20' Readimade Galvanized Cable
5/16" x 20' Readimade Stainless Steel Cable
5/16" x 25' Readimade Galvanized Cable
5/16" x 25' Readimade Stainless Steel Cable
5/16" x 30' Readimade Galvanized Cable
5/16" x 30' Readimade Stainless Steel Cable
5/16" x 35' Readimade Galvanized Cable
5/16" x 35' Readimade Stainless Steel Cable
5/16" x 40' Readimade Galvanized Cable
5/16" x 40' Readimade Stainless Steel Cable
5/16" x 45' Readimade Galvanized Cable
5/16" x 45' Readimade Stainless Steel Cable
5/16" x 50' Readimade Galvanized Cable
5/16" x 50' Readimade Stainless Steel Cable
560C Pulley
560L Pulley {Best Value}
560LAPulley (All Aluminum)
This pulley has an all aluminum case and sheave, oilite bushings, stainless hardware.
560W Pulley {Best Value}
4" alum. sheave, olite bushings, galv. frame, and hardware. 2 weights of 5# each attach to each side, which holds tension on cables. Designed for saltwater use. 2 ton rating. Accepts up to 3/8" cable.
560X Pulley
4" aluminum sheave, olite bushings, glav. frame, and hardware. Designed for saltwater use. 2 ton rating. Accepts up to 3/8" cable. Designed to bolt to wooden overhead beams. brackets 8" long
6' Aluminum Spreader Bar
3000# Capacity. 36" Stainless Drops Standard. Can be shipped UPS. Custom sizes available.
6' Galvanized Spreader Bar
6' spreader bar (4" i-beam). Price includes galvanized cable drops.
6" x 16' Carpet Strip
Carpet strips for bunk boards.
6"x12' with lead weights and keel pads
6x12 nylon slings with lead weights and keel pads
6"x12' without lead weights and keel pads
6x12 nylon slings without lead weights and keel pads
6"x14' with lead weights and keel pads
6x14 nylon slings with lead weights and keel pads
6"x14' without lead weights and keel pads
6x14 nylon slings without lead weights and keel pads
6"x16' with lead weights and keel pads
6x16 nylon slings with lead weights and keel pads
6"x16' without lead weights and keel pads
6x16 nylon slings without lead weights and keel pads
6"x18' with lead weights and keel pads
6x18 nylon sling with lead weights and keel pads
6"x18' without lead weights and keel pads
6x18 nylon slings without lead weights and keel pads
6"x20' with lead weights and keel pads
6x20 nylon slings with lead weights and keel pads
6"x20' without lead weights and keel pads
6x20 nylon slings without lead weights and keel pads
6000 (CL) - Cradle Kit (Steel Mount)
6000lb capacity
Cradle Boat Lift Kit
(Steel Mount)
6000 (PC) - Pontoon Cradle (Steel Mount)
6000lb capacity
Pontoon Cradle Kit (Steel Mount)
6000 (PC) - Pontoon Cradle {Wood Mount}
6000lb capacity
Pontoon Cradle Kit (Wood Mount)
6000 (SL) - Sling Kit (Steel Mount)
6000lb capacity
Sling Boat Lift Kit
(Steel Mount)
6000# - 2 Point Pick Up (Wood Mount)
6000lb capacity
2 Point Pick Up
(Wood Mount)
6000# - 3 Point Pick Up (Wood Mount)
6000lb capacity
3 Point Pick Up
(Wood Mount)
6000# 6" Channel Cradle Boat Lift
6000lb 6" Channel
Cradle Boat Lift
6000# 6" Channel Pontoon Cradle Boat Lift
6000lb 6" Channel
Pontoon Cradle Boat Lift
6000# 6" Channel Sling Boat Lift
6000lb 6" Channel
Sling Boat Lift
6000# CL (Cradle) Aluminum Boat Lift
6000# Aluminum Cradle Lift
6000# SL (Sling) Aluminum Boat Lift
6000# Aluminum Sling Lift
6'x4'x12" Float Drum
Buoyancy 1370#.
Weight 65#.
6'x4'x16" Float Drum
Buoyancy 1851#.
Weight 69#.
6'x4'x18" Float Drum
Buoyancy 2090#.
Weight 75#.
6'x4'x24" Float Drum
Buoyancy 2810#.
Weight 92#.
7' Aluminum Spreader Bar
3000# Capacity. 36" Stainless Drops Standard. Can be shipped UPS. Custom sizes available.
7' Galvanized Spreader Bar
7' spreader bar (4" i-beam). Price includes galvanized cable drops.
8' x 12' Floating Swim Dock Kit
Foam filled float drums (2380# total buoyancy), aluminum frame work with stainless fasteners, all wood included. Kit easily assembles in 3 hours.
8' x 16' Floating Swim Dock Kit
Foam filled float drums (2380# total buoyancy), aluminum frame work with stainless fasteners, all wood included. Kit easily assembles in 3 hours. Ladder and Cleats not included.
8' x 25' Floating Swim Dock Kit
Foam filled float drums (2380# total buoyancy), aluminum frame work with stainless fasteners, all wood included. Kit easily assembles in 3 hours. Ladder and Cleats not included.
8" x 10' Galvanized Cradle Beam
15,000# Capacity. Shown with optional chock bracket. This item may take 10 days for shipment.
8" x 12' Galvanized Cradle Beam
15,000# Capacity. Shown with optional chock bracket. This item may take 10 days for shipment.
8" x 14' Galvanized Cradle Beam
15,000# Capacity. Shown with optional chock bracket. This item may take 10 days for shipment.
8"x12' with lead weights and keel pads
8x12 nylon slings with lead weights and keel pads
8"x14' with lead weights and keel pads
8x14 nylon slings with lead weights and keel pads
8"x16' with lead weights and keel pads
8x16 nylon slings with lead weights and keel pads
8"x18' with lead weights and keel pads
8x18 nylon slings with lead weights and keel pads
8"x20' with lead weights and keel pads
8x20 nylon slings with lead weights and keel pads
8'x4'x12" Float Drum
Buoyancy 1800#.
Weight 75#.
8'x4'x16" Float Drum
Buoyancy 2415#.
Weight 91#.
8'x4'x18" Float Drum
Buoyancy 2700#.
Weight 98#.
8'x4'x24" Float Drum
Buoyancy 3700#.
Weight 124#.
ACE 401 Power Hoist
2800# rating on a single line pull.
Almag 35 "S" Cleat
Aluminum for corrosion resistance. Magnesium for strength. Available with natural or powder coated finish, please call for powder coated price.
Aluminum Walkway Plank
Dimensions: 2 x 12 x 14
Angle Dock Bracket
Angles are used to attach interior stringers to the exterior frame. Use with 2 H-W Washer plates to make a strong assembly. Use 1/2" carriage bolts for assembly.
Back Cover - White
Back cover for AMS gearboxes.
Back Plate Dock Bracket
Use the Backup Plate for additional strength behind H-SM or H-SF. Use with 1/2" carriage bolts.
Boat House Cable Winder for 2" Pipe (Split)
Fits over 2" ID pipe. Split for easy installation. 15 5/8" long X 2 3/8" internal diameter. Machined aluminum. Fits Between 102 Strap Bearings. Can be cut with a hacksaw. Fits 1/4", 5/16", and 3/8" cable. Split in half for retro fit installation. Custom sizes available.
Boat House Cable Winders
2" boat house cable winder (only comes in this size). Fits over 2" ID pipe.15 5/8" long X 2 3/8" internal diameter. Machined aluminum. Fits Between 102 Strap Bearings. Can be cut with a hacksaw. Fits 1/4", 5/16", and 3/8" cable. Custom sizes available.
Boat Lift Canopies
5 year warranty. Withstands hurricane force winds. Erects quickly. Available in green, tan or white. Fabric is 18 oz pcv. Custom sizes and colors available. Shipped motor freight collect.
Bow Eye, Keel Plate
Comes complete with lifting eye, threaded rod, swivel pinion, and adapter plate.
Bremas Switch - 125V/240V - Switch Only
Bremas Switch - 125V/240V - Switch Only
Bremas Switch - 125V/240V - Switch, Handle, and Box
Bremas Switch - 125V/240V - Switch, Handle, and Box
Bremas Switch Handle
Bremas Switch Handle
Bremas Switch with Wiring Harnes & GFCI, 125V
Bremas Switch with Wiring Harnes & GFCI, 125V
(SPRING / MAINTAINED)
Brite Zinc
High Performance Zinc Rich Coating. Price is per 12.5oz aerosol can.
Cable Guide Post
Cable Winder Bushing for 1 1/2" Pipe
Cable Winder Bushing for 1 1/2" Pipe
Carpeted Wood Bunks
Chain Retainer Bracket
The chain retainer is used to hold chain to a dock. Use 1/2" chain or less. Use with H-W washer plates to strengthen with 1/2" carriage bolts.
Cleat Angle Bracket
Use the cleat angle under your cleats and decking to strengthen your cleats. This enables you to tie you cleats directly to your dock stringers. Can be used with any of our steel or aluminum cleats.
Cleat Seat
Will not rust or corrode like metal cleats.
Cover Jet Ski - w/ Black plate & Screws
Cover Jet Ski - w/ Black plate & Screws
Cover White - w/ SS Clips & bolts
Cover White - w/ SS Clips & bolts
24" Long 17" Wide
Cradle Conversion Kit
Convert your existing sling kit to a cradle kit. Kit includes 2-5"x9' cradle beams, 8 chock brackets and bolts, 4 cable guide posts, and 4 1/2" shackles. You supply your own lumber bunk boards.
Cradle Conversion Kit (Galvanized)
Convert your existing sling kit to a cradle kit. Kit includes 2-5"x9' cradle beams, 8 chock brackets and bolts, 4 cable guide posts, and 4 1/2" shackles. You supply your own lumber bunk boards.
Crimped Eye and Thimble
Plus price of cable per foot for finished end.
Crimped Eye and Thimble with Hook
Plus price of cable per foot for finished end with hook.
Crimped Eye and Thimble with Shackle
Plus price of cable per foot for finished end with shackle.
Crimpers
The large crimp tool features no removable parts and no rotating dies to set. The high-leverage handle and comfortable hand grips make it easy to tackle the toughest crimp jobs. The crimp depth is controlled by a variable adjustment screw.
Deadman Hanger (Wood)
Double PWC Drive Up
Double Retractable Screens
Please call us for pricing and we will need the dimensions.
Drive Drum
Drum available in 4" and 6" widths. Spool diameter 1.87". Hot dipped galvanized. Custom sized available. Please call for pricing.
E-Gear Cover
White cover for AMS E-Gear.
Enclosures
With Endpanels and 10' Door. Demo units available-call for details.
Extend- A -Switch
Extend- A -Switch
Galvanized Coupling Nuts
Hot Dipped Galvanized
GFCI - 125V 6' Cord
GFCI - 125V 6' Cord
GFCI - 240V 5' Cord
GFCI - 240V 5' Cord
Grease Gun
• 3-way loading action: cartridge, drum and bulk
• Solid steel head construction for durability
• Heavy-duty spring for constant priming
• Follower rod lock for easy loading in any position
• Steel plunger handle
• Rated at 6000 psi.
Hanger Bracket (I-Beam)
Must know flange width.
Hanger Bracket (Wood)
Hardware Kit for Large Covers
Hardware Kit for Large Covers
Heavy Duty Joist Hanger
Hot dipped galvanized (height 12”) Designed to support a 3” wooden beam. 1/2” bolts Not Included.
Hose Holder-- Natural Aluminum Finish
Available in two sizes (small holds up to 50' and large holds up to 100'). Pre-drilled for easy installation.
Hose Holder-- Powder Coated White
Available in two sizes (small holds up to 50' and large holds up to 100'). Pre-drilled for easy installation.
Hose Holder-- Powder Coated White with Faucet
Available in two sizes (small holds up to 50' and large holds up to 100'). Pre-drilled for easy installation.
Hose Stanchion
Fabricated from 3"x3" marine grade aluminum. Standard height: 29". Standard base plate: 5 1/2"x5 1/2". Available with small (50' capacity) or large (100' capacity) hose holder.
Inside Corner Dock Bracket
Inside corners are used with an outside corner to sandwich the wood together to create a very strong corner. The 1/2" gussett on the inside adds a lot of strength to a dock. Use 1/2" carriage bolts for assembly.
Lunmar Cargo Lift
NOT CERTIFIED FOR LIFTING PEOPLE!
Lunmar Floating PWC Lift
Lunmar Swamp Cooler
16" Variable Speed, Direct Drive
36" Variable Speed , Direct Drive
48" Two Speed, Belt Drive
Magnum 10,000# "HD" Lift
The "HD" model is designed to afford maximum hull support while keeping a low profile appearance. This design allows for easy access to your vessel because it is positioned inches away from your dock. Standard to the "HD" model is a fully adjustable I-Beam bunking system to gently cradle your boat.
Magnum 12,500# "HD" Lift
The "HD" model is designed to afford maximum hull support while keeping a low profile appearance. The design allows for easy access to your vessel because it is positioned inches away from your dock. Standard "HD" model is a fully adjustable I-Beam bunking system to gently cradle your boat.
Magnum 15,000# "HD" Lift
The "HD" model is designed to afford maximum hull support while keeping a low profile appearance. The design allows for easy access to your vessel because it is positioned inches away from your dock. Standard "HD" model is a fully adjustable I-Beam bunking system to gently cradle your boat.
Magnum 20,000 "HD" Lift
The "HD" model is designed to afford maximum hull support while keeping a low profile appearance. The design allows for easy access to your vessel because it is positioned inches away from your dock. Standard "HD" model is a fully adjustable I-Beam bunking system to gently cradle your boat.
Magnum 25,000 "HD" Lift
The "HD" model is designed to afford maximum hull support while keeping a low profile appearance. The design allows for easy access to your vessel because it is positioned inches away from your dock. Standard "HD" model is a fully adjustable I-Beam bunking system to gently cradle your boat.
Magnum 30,000# "HD" Lift
The "HD" model is designed to afford maximum hull support while keeping a low profile appearance. The design allows for easy access to your vessel because it is positioned inches away from your dock. Standard "HD" model is a fully adjustable I-Beam bunking system to gently cradle your boat.
Magnum 40,000# "HD" Lift
The "HD" model is designed to afford maximum hull support while keeping a low profile appearance. The design allows for easy access to your vessel because it is positioned inches away from your dock. Standard "HD" model is a fully adjustable I-Beam bunking system to gently cradle your boat.
Manual Winch Plate
Motorized Screens
Please call us for pricing and we will need the dimensions.
Offset Hanger (I-Beam)
Outside Corner Dock Bracket
The outside corner end is used for the ends of docks or fingers. Good for square platforms. Use 1/2" carriage bolts for assembly.
Outside Corner Dock Bracket - FEMALE
Outside corner female has 2-1/2" tabs with a hole for 3/4" bolt or pin. Use with H-OCM or H-SM to create a hinge connection on your dock. Use 1/2" carriage bolts for assembly.
Outside Corner Dock Bracket - FEMALE/FEMALE
Use the outside corner female/female on docks where you need to hinge two sections on a corner. This needs to be used with an H-IC (inside corner) for strength. It can also be used with H-SM or H-OCM to create a hinge. Use 1/2" carriage bolts for assembly.
Outside Corner Dock Bracket - FEMALE/MALE
Use the outside corner female/male on docks where you need to hinge two sections on a corner. This needs to be used with an H-IC (inside corner) for strength. It can also be used with H-SF/M or H-OCF/M to create a hinge. Use 1/2" carriage bolts for assembly.
Outside Corner Dock Bracket - MALE
Outside corner male has 2-1/2" tabs with holes for a 3/4" bolt or pin. Use with H-OCF or H-SF to create a hinge connection on your dock. Use 1/2" carriage bolts for assembly.
Outside Corner Dock Bracket - MALE/MALE
Use the outside corner male/male on docks where you need to hinge two sections on a corner. This needs to be used with an H-IC (inside corner) for strength. It can also be used with H-SF or H-OCF to create a hinge. Use 1/2" carriage bolts for assembly.
Outside Corner End Dock Bracket - 3" Pipe
The outside corner end with a 3" pipe holder is used in place of a standard H-OCE if you need a place to put a pipe holder without using any additional hardware. For use with pipe 2-1/2" inside diameter or less. Use 1/2" carriage bolts for assembly.
Pick Board
This Pick Board is what our installer uses to Install all the boat lifts in our area. It is 14' long.
Piling Ring
For attaching floating docks to pilings up to 10" in diameter.
Pontoon Bunks
SET OF 4 BUNKS
(4) 2 x 8 x 14 treated wood bunks not carpeted
Pulley Weights for 560 {Best Value}
(2) 5# weights that attach to 560 pulley.
Railway Winch
800# Capacity. 18' per minute. Spool holds 200' of 1/4" cable. Cable NOT included. Shown with optional remote control. Higher capacities available.
Sheave(560P)
4" Aluminum Sheaves that come with three different size bores 5/8", 1/2", and 7/8".
Single Dock Bracket - FEMALE
Single "T" female has two 1/2" tabs with a hole for 3/4" bolt or pin. Use with H-SM and bolt to the side of your dock to attach fingers. These can also be used for ramps or anywhere a hinge is needed. Use 1/2" carriage bolts for assembly.
Single Dock Bracket - MALE
A single "T" male has one 1/2" tab with a hole for a 3/4" bolt or pin. Use with H-SF and bolt to the side of your dock to attach fingers. These can also be used for ramps or anywhere a hinge is needed. Use 1/2" carriage bolts for assembly.
Single PWC Drive Up
Single Retractable Screens
Please call us for pricing and we will need the dimensions.
Splice Plates
The H-SP splice plate is used to splice lumber together. You can splice two 8' sections of 2x8 lumber together and make a 16' piece. This piece of hardware comes in handy when you can't transport or even find a piece of lumber in the right length. Use 1/2" carriage bolts for assembly.
Stern Platform
24" x 30 Stern Platform
Stern work platforms are available for HD and CBX model boat lifts. They are constructed with a 24 x 26 inch grating platform that extends 4 feet 6 inches beyond the lift beam. Stern platforms make changing the propeller or removing the drain plug a snap.
TRANSMITTER
We have the old model and the new model. Click more to see which one you need to order
V Drive Belt - 4L220
Direct replacement for AMS 1000# & 1250# gearboxes with 2" pulley.
V Drive Belt - 4L240
Direct replacement for AMS 1000# & 1250# gearboxes with 6" pulley.
V Drive Belt - 4L260
Direct replacement for AMS 1000# & 1250# gearboxes with 5.25" pulley and 7" pulley.
V Drive Belt - 4L280
Direct replacement for AMS gearboxes with 6" pulley and 8" pulley.
V Drive Belt - 4L300
Direct replacement for AMS gearboxes with 7" pulley.
V Drive Belt - 4L320
Direct replacement for AMS gearboxes with 8" pulley.
V Drive Belt - 4L360
Direct replacement for AMS 3000 & 4000 with 10" pulley.
V Drive Belt - 4L400
Direct replacement for AMS 3000 & 4000 with 12" pulley.
V Drive Belt - Torque F AX35
Direct replacement for AMS 6500 gearbox with 10.4" pulley.
V Drive Belt - Torque F AX37
Direct replacement for AMS 8500 gearboxes with 11.2" pulley.
Washer Plate
Washer plates are used with to strengthen the bolt connection anywhere bolts are used with other hardware by creating a sandwich between the washer plate and the other hardware being used.
top
top
|
